Salta al contenuto principale

Motorola Moto G3 Screen Replacement

Guida Archiviata
Questa guida รจ mantenuta solo per scopi storici. Usa la versione aggiornata della guida per eseguire la riparazione.

Cosa ti serve

  1. Motorola Moto G3 Screen  Replacement, Prerequisite Guide: passo 1, immagine 1 di 2 Motorola Moto G3 Screen  Replacement, Prerequisite Guide: passo 1, immagine 2 di 2
    • Use the plastic opening tool to open the back cover as shown in the photo.

  2. Motorola Moto G3 Screen  Replacement: passo 2, immagine 1 di 1
    • Heat an iOpener in the microwave for 30 seconds.

    • Place the heated iOpener on all four edges of the screen for approximately 2 minutes.

  3. Motorola Moto G3 Screen  Replacement: passo 3, immagine 1 di 1
    • Apply the plastic opening tool on the edge of the screen near the front camera.

    • After creating enough space, allow the opening tool to be inserted on the side of the phone.

    • Create another space on the other side of the screen.

    • Leave the opening tool inserted.

    • Carefully apply the larger plastic opening tool by sliding it through the longer edge of the screen.

  4. Motorola Moto G3 Screen  Replacement: passo 4, immagine 1 di 3 Motorola Moto G3 Screen  Replacement: passo 4, immagine 2 di 3 Motorola Moto G3 Screen  Replacement: passo 4, immagine 3 di 3
    • A strip will be attached to the motherboard as shown.

    • Using tweezers, carefully detach the strip from the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Irkan Notta

Membro da: 03/19/18

1.034 Reputazione

7 Guide realizzate

Team

Baylor, Team S5-G3, Williams Spring 2018 Membro di Baylor, Team S5-G3, Williams Spring 2018

BU-WILLIAMS-S18S5G3

3 Membri

9 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 944