Motorola Moto E5 Play Back Cover Replacement

Introduzione

Follow this guide to replace a scratched or worn back cover for the Motorola Moto E5 Play.

Cosa ti serve

Passo 1 Back Cover

Motorola Moto E5 Play Back Cover Replacement, Back Cover: passo 1, immagine 1 di 2

Motorola Moto E5 Play Back Cover Replacement, Back Cover: passo 1, immagine 2 di 2

Insert your fingernail or the flat end of a spudger into the notch on the bottom right corner of the phone.
Pry with your fingernail or twist the spudger to release the back cover's clips from the phone.

Modifica

Passo 2

Insert your fingernail or the flat end of a spudger into the seam on the bottom of the phone and slide it along the edge to release the clips holding the back cover to the phone.

Modifica

Passo 3

Continue sliding your fingernail or spudger along the seam around the rest of the phone to release the remaining clips.

Modifica

Passo 4

Lift the back cover and remove it from the phone.
To reinstall the back cover, align the cover with the phone and squeeze along the edges to snap the clips back into place.

Modifica

Conclusione

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Motorola Moto E5 Play Answers community for troubleshooting help.

Un'altra persona ha completato questa guida.