Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

Use this guide to remove the Moto E4 motherboard cover. Doing so allows access to the front facing camera, the rear facing camera, and the motherboard.

  1. Before removing the battery, power off your Moto E4. Remove the plastic cover by gently prying it up from the notch at the bottom right corner of the phone.
    • Before removing the battery, power off your Moto E4.

    • Remove the plastic cover by gently prying it up from the notch at the bottom right corner of the phone.

    • With the phone face down, lift the battery up by the labeled tab and remove it from the device.

  2. Essential Electronics Toolkit

    Small Toolkit. Big Possibilities.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  3. Remove all nine 4mm screws  from the top plastic cover with a Phillips driver. Remove all nine 4mm screws  from the top plastic cover with a Phillips driver.
    • Remove all nine 4mm screws from the top plastic cover with a Phillips driver.

  4. Gently pry up the plastic cover from the gap between it and the phone edge. Start on the right side as indicated by the first picture.
    • Gently pry up the plastic cover from the gap between it and the phone edge.

    • Start on the right side as indicated by the first picture.

    • Continue prying around the rest of the cover in a counter clockwise path.

    • Once loose, remove the plastic cover from the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Nate Tjepkema

Membro da: 24/01/2019

1.095 Reputazione

7 Guide realizzate

Team

Cal Poly, Team S2-G4, White Winter 2019 Membro di Cal Poly, Team S2-G4, White Winter 2019

CPSU-WHITE-W19S2G4

4 Membri

15 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 15

Tutti i Tempi: 232