Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Motorola MOTO W755 Cell Phone Top Panel Replacement

Introduzione

Replace the top panel for your Motorola MOTO phone.

Cosa ti serve

  1. Motorola MOTO W755 Cell Phone Top Panel Replacement, Battery: passo 1, immagine 1 di 2 Motorola MOTO W755 Cell Phone Top Panel Replacement, Battery: passo 1, immagine 2 di 2

    • Using your finger, press down on the clip holding the back cover on

    • Pull the back cover off.

    Traduci

  2. Motorola MOTO W755 Cell Phone Top Panel Replacement: passo 2, immagine 1 di 2 Motorola MOTO W755 Cell Phone Top Panel Replacement: passo 2, immagine 2 di 2

    • Place thumb and index finger in the spaces on either side of the battery.

    • Pull battery out.

    Traduci

  3. Motorola MOTO W755 Cell Phone Top Panel Replacement, Top Panel: passo 3, immagine 1 di 3 Motorola MOTO W755 Cell Phone Top Panel Replacement, Top Panel: passo 3, immagine 2 di 3 Motorola MOTO W755 Cell Phone Top Panel Replacement, Top Panel: passo 3, immagine 3 di 3

    • Use the plastic opening tool to pull peel back screen cover.

    • Gently peel back the screen cover from the speaker slit.

    • Using the T6 Torx-screwdriver, remove the four 4.3 mm screws from the top panel.

    Traduci

  5. Motorola MOTO W755 Cell Phone Top Panel Replacement: passo 4, immagine 1 di 3 Motorola MOTO W755 Cell Phone Top Panel Replacement: passo 4, immagine 2 di 3 Motorola MOTO W755 Cell Phone Top Panel Replacement: passo 4, immagine 3 di 3

    • Using the flat end of the plastic opening tool, insert it underneath the plastic cover on the top right corner.

    • Move the opening tool around the phone counter clockwise.

    • Pop the plastic cover off by twisting the plastic covering tool.

    Traduci

  6. Motorola MOTO W755 Cell Phone Top Panel Replacement: passo 5, immagine 1 di 2 Motorola MOTO W755 Cell Phone Top Panel Replacement: passo 5, immagine 2 di 2

    • Using a flat head screwdriver, insert it between the metal logic board casing and the top portion of the phone

    • Move the plastic opening tool around the phone until part of the casting is popped off.

    • You will need to pop in the four plastic fasteners individually from the metal casing to remove it

    • Be careful not to rip the cable ribbons that are attached to the logic board and casing

    Traduci

  7. Motorola MOTO W755 Cell Phone Top Panel Replacement: passo 6, immagine 1 di 1

    • Use the flat end of the plastic opening tool to unclip the cable ribbon from the logic board

    Traduci

  8. Motorola MOTO W755 Cell Phone Top Panel Replacement: passo 7, immagine 1 di 1

    • You now have the top panel completely detached.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 5 altri collaboratori

Roberta Glenn

Membro da: 07/11/12

43 Reputazione

4 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

Cal Poly, Team 1-3, Regan SU 2012 Membro di Cal Poly, Team 1-3, Regan SU 2012

CPSU-REGAN-SU12S1G3

2 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,900