Introduzione

Use this guide to replace the glass on the rear of your Motorola Droid RAZR M.

Strumenti

Nessun attrezzo richiesto.

Parti

  1. Shattered!
    • Shattered!

    Aggiungi Commento

  2. Glass won't just pop off. It is held by a very sticky tape. Carefully scraping the tape with the glass pieces off and vacuum the area after to prevent a clean surface.
    • Glass won't just pop off. It is held by a very sticky tape. Carefully scraping the tape with the glass pieces off and vacuum the area after to prevent a clean surface.

    • Be aware of jumping tiny glass pieces during process. Protect your eyes and area around you. They can get stuck in skin too.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • To replace the part you first need to attach the sticky tape. It comes in the correct outlines. Take the inner parts out to keep those areas free (Camera, Flash, Loudspeaker and a hole).

    • Before you take the film off practice the attaching. You will have it hard to reposition after its attached. Same goes with the lens itself, practice before the tape film is off. Once you feel safe to go, peel the film off and go for it!

    Aggiungi Commento

    • Done :-)

    Aggiungi Commento

Linea Traguardo

Altre 3 persone hanno completato questa guida.

Alex R

Membro da: 27/09/2013

188 Reputazione

1 Guida realizzata

This is not a razr maxx !!!!

Fausto Lebron - Replica

This isn't a Razr Maxx. The back doesn't have glass on a razr maxx.

Alex Tucker - Replica

This is Droid razr m . not maxx

Qais Afridi - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 7,155