Introduzione

This guide will go through the steps of replacing the camera module for the Motorola MB525 starting from the tear down of the phone to replacement of the camera module itself.

Using the screwdriver and the T-5 bit, unscrew the seven 5 mm screws around the outside of the phone.
  • Using the screwdriver and the T-5 bit, unscrew the seven 5 mm screws around the outside of the phone.

Aggiungi Commento

Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up.
  • Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up.

Aggiungi Commento

  • Use a plastic opening tool to pry the battery out of the phone.

Aggiungi Commento

  • Unscrew the two silver screws located at the top of the back of the phone.

Aggiungi Commento

  • Use a plastic opening tool to gently pry the midframe from the rest of the phone.

Aggiungi Commento

  • Start to pry around the bottom of the camera module with the metal spudger and replace with the new camera module.

  • Be careful of the pins that are connected to the camera module on the bottom.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Morgan Roark

Membro da: 08/10/2014

327 Reputazione

3 Guide realizzate

Team

USF Tampa, Team 14-2, Leahy Fall 2014 Membro di USF Tampa, Team 14-2, Leahy Fall 2014

USFT-LEAHY-F14S14G2

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 277