Salta al contenuto principale

Motorola Defy Earpiece Speaker Replacement

Cosa ti serve

  1. Motorola Defy Earpiece Speaker Replacement, Rear Case: passo 1, immagine 1 di 1
    • Using the screwdriver and the T-5 bit, unscrew the seven 5 mm screws around the outside of the phone.

  2. Motorola Defy Earpiece Speaker Replacement: passo 2, immagine 1 di 2 Motorola Defy Earpiece Speaker Replacement: passo 2, immagine 2 di 2
    • Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up.

  3. Motorola Defy Earpiece Speaker Replacement, Battery: passo 3, immagine 1 di 1
    • Use a plastic opening tool to pry the battery out of the phone.

  4. Motorola Defy Earpiece Speaker Replacement, Midframe: passo 4, immagine 1 di 1
    • Unscrew the two silver screws located at the top of the back of the phone.

  5. Motorola Defy Earpiece Speaker Replacement: passo 5, immagine 1 di 1
    • Use a plastic opening tool to gently pry the midframe from the rest of the phone.

  6. Motorola Defy Earpiece Speaker Replacement, Motherboard: passo 6, immagine 1 di 2 Motorola Defy Earpiece Speaker Replacement, Motherboard: passo 6, immagine 2 di 2
    • Use metal spudger to pry off the middle yellow flap carefully.

  7. Motorola Defy Earpiece Speaker Replacement: passo 7, immagine 1 di 3 Motorola Defy Earpiece Speaker Replacement: passo 7, immagine 2 di 3 Motorola Defy Earpiece Speaker Replacement: passo 7, immagine 3 di 3
    • Use tweezers again to pry off the second yellow flap carefully.

  8. Motorola Defy Earpiece Speaker Replacement: passo 8, immagine 1 di 1
    • The motherboard is the whole green board. Pry it off carefully with tweezers from the sides and place it aside.

  9. Motorola Defy Earpiece Speaker Replacement, Remove the earpiece speaker: passo 9, immagine 1 di 2 Motorola Defy Earpiece Speaker Replacement, Remove the earpiece speaker: passo 9, immagine 2 di 2
    • Once the motherboard is removed, use either the metal tweezers or the metal spudger to remove the speaker by prying it as shown.

    • The speaker is glued to its position, thus you will have to glue the new one back on.

    • The speaker must be pried off carefully. It is very delicate.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Andres

Membro da: 10/08/14

101 Reputazione

1 Guida realizzata

Team

USF Tampa, Team 14-2, Leahy Fall 2014 Membro di USF Tampa, Team 14-2, Leahy Fall 2014

USFT-LEAHY-F14S14G2

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 619