Introduzione

Motherboard installation requires a teardown of the device.

Parti

Nessuna parte richiesta.

Remove the battery by sliding it down the rails to which it is connected.
  • Remove the battery by sliding it down the rails to which it is connected.

Aggiungi Commento

Find a flat head or Phillips head screwdriver.
  • Find a flat head or Phillips head screwdriver.

  • Insert the screwdriver into the holes in the plastic rod connecting the key pad guard to the rear casing.

  • Use the screwdriver to push the rods towards each other until they click out of their locked position.

  • Note: This may require a large amount of force.

Aggiungi Commento

  • Slide off the antenna guard and locate the four clips on the exterior of the rear casing.

  • Simultaneously push the clips outward while lifting the rear casing and keyguard away from the front casing.

  • Remove the key guard from the rear casing by taking it out of its position.

Aggiungi Commento

  • Locate and unplug the black component of the antenna from the motherboard.

  • Under the black component should be a blue component. Unscrew this component in order to free the antenna.

Aggiungi Commento

  • Slide the antenna out of the green tubing and slide the green tubing out of it's corresponding hole on the motherboard.

Aggiungi Commento

  • Lift the motherboard out of its location in the front casing.

  • Do this slowly and gently so that none of the motherboard's components are damaged.

Aggiungi Commento

  • With your new motherboard, hold the LCD side of the motherboard face down. Align the four clips on the front casing with the four notches on the motherboard.

  • While doing so, insert the LCD into the compartment in the front casing.

Aggiungi Commento

  • Press firmly on the motherboard until it is snug inside the casing.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Andrew Lam

Membro da: 17/04/2012

28 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 9-46, Regan Spring 2012 Membro di Cal Poly, Team 9-46, Regan Spring 2012

CPSU-REGAN-S12S9G46

5 Membri

8 Guide realizzate

Nice, thanks.

Daniel - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 11

Tutti i Tempi: 2,355