Parti

Nessuna parte richiesta.

Place the phone with the screen facedown on a flat surface.
  • Place the phone with the screen facedown on a flat surface.

Aggiungi Commento

Pinch the latch upwards towards the top of the phone.
  • Pinch the latch upwards towards the top of the phone.

  • Lift the back cover of the phone.

  • There are tabs on the bottom end of the battery cover that the cover pivots about.

Aggiungi Commento

  • Remove the battery by pressing on the edge of the battery from the top of the phone towards the bottom and lifting up.

Aggiungi Commento

  • Remove the 2 clips from the sides of the phone, just below the screen with the pry tool.

Aggiungi Commento

  • The circuit board for the buttons is now free to be removed and replaced.

Aggiungi Commento

  • Pry under the display screen, around each edge until it comes loose from the circuit board.

    • You are removing the black plastic piece that holds the button circuit board. The piece has an aluminum frame around it. The two pieces will be removed together and don't need to be separated.

Aggiungi Commento

  • Gently remove the plastic and metal framework of the phone by picking it up.

Aggiungi Commento

  • The front speaker should be contained in the framework that you just removed. Remove the speaker by lifting it out.

  • Use a tool that isn't sharp to poke it out should the first method prove too difficult.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jason

Membro da: 23/10/2014

304 Reputazione

3 Guide realizzate

Team

Michigan Tech, Team 1-6, Lauer Fall 2014 Membro di Michigan Tech, Team 1-6, Lauer Fall 2014

MTU-LAUER-F14S1G6

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 51