Introduzione

The glass covering on mobile devices can be prone to damage and constant wear and tear. The Motorola Adventure V750 has a very moderate process in replacing the front protection screen.

Parti

Nessuna parte richiesta.

    • Remove the back cover and battery of the Motorola Adventure V750.

    Aggiungi Commento

    • Remove four screws that are visible using a screwdriver.

    Aggiungi Commento

    • After removing the battery chamber, you can unclip one of the ribbons that connect the screen to the main body of the phone. This divides the phone into two halves.

    Aggiungi Commento

  1. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Remove two screws located at the bottom of the main display.

    Aggiungi Commento

    • Now the display(screen) can be removed by sliding a sharp object or fingernail along the edge of the housing. This releases the clip attached to the screen.

    Aggiungi Commento

    • Release the display up to the point where you see two metal parts (left and right of the Motorola text). The top part of the display is held on with double sided tape.

    Aggiungi Commento

    • Gently unstick the tape and remove the display. Be careful not to bend this part.

    Aggiungi Commento

    • Carefully install the new glass.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Kyle

Membro da: 01/10/2012

572 Reputazione

5 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 557