Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide will teach you the inner workings of both the motor and cord. You will need to know how to use a screwdriver as well as pliers. Make sure to familiarize yourself with the basics of crimping.

Parti

  1. Remove the highlighted screws shown with a Phillips #2 Screwdriver.
    • Remove the highlighted screws shown with a Phillips #2 Screwdriver.

  2. Remove the motor from the motor mounting plate. Pull the motor and cord to the side.
    • Remove the motor from the motor mounting plate. Pull the motor and cord to the side.

  3. Use pliers to grip the crimp.
    • Use pliers to grip the crimp.

  4. Open the crimp by pressing it opposite to how the crimp was pressed. Repeat for second crimp.
    • Open the crimp by pressing it opposite to how the crimp was pressed. Repeat for second crimp.

  5. Remove the crimps from the wires by pulling them off.
    • Remove the crimps from the wires by pulling them off.

  6. Untwist the brown and the silver wire by gripping the tip and unwinding them. Do the same for the second wire.
    • Untwist the brown and the silver wire by gripping the tip and unwinding them. Do the same for the second wire.

  7. Separate the cord and motor.
    • Separate the cord and motor.

    • Now, depending on whether the cord or the motor was broken, head to the device page to order a new one.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Kamal Taha

Membro da: 27/08/2015

627 Reputazione

5 Guide realizzate

Team

USF Tampa, Team 1-3, Sullivan Fall 2015 Membro di USF Tampa, Team 1-3, Sullivan Fall 2015

USFT-SULLIVAN-F15S1G3

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 28

Tutti i Tempi: 2,487