Salta al contenuto principale

Monster SoundStage S1 Mini Disassembly

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. Monster SoundStage S1 Mini Disassembly, Monster SoundStage S1 Mini Disassembly: passo 1, immagine 1 di 3 Monster SoundStage S1 Mini Disassembly, Monster SoundStage S1 Mini Disassembly: passo 1, immagine 2 di 3 Monster SoundStage S1 Mini Disassembly, Monster SoundStage S1 Mini Disassembly: passo 1, immagine 3 di 3
    • Unplug and power off the speaker.

    • Lay the device on its back and unpeel the silicone base.

    • Unscrew the four 5mm Torx Security #10 at base.

  2. Monster SoundStage S1 Mini Disassembly: passo 2, immagine 1 di 3 Monster SoundStage S1 Mini Disassembly: passo 2, immagine 2 di 3 Monster SoundStage S1 Mini Disassembly: passo 2, immagine 3 di 3
    • Return the device rightside up and unpeel the black display cover over the sensor board.

    • Unscrew the two 3mm Torx Security #6 screws on the edge of the device.

    • Unscrew the two 5mm Torx Security #10 in the middle of the device.

    • Do not worry, the display board will re-stick when reassembling.

  3. Monster SoundStage S1 Mini Disassembly: passo 3, immagine 1 di 2 Monster SoundStage S1 Mini Disassembly: passo 3, immagine 2 di 2
    • Remove the metal screen.

  4. Monster SoundStage S1 Mini Disassembly: passo 4, immagine 1 di 1
    • Unscrew the two 4mm Torx Security #10 screws on the top edge.

    • Unscrew the six 10mm Torx Security #10 screws around the perimeter.

  5. Monster SoundStage S1 Mini Disassembly: passo 5, immagine 1 di 2 Monster SoundStage S1 Mini Disassembly: passo 5, immagine 2 di 2
    • Remove the four 10mm Torx Security #10 screws around each individual speakers.

    • Loosen the two Torx Security #10 screws under the speaker using pliers or a long screwdriver.

    • Screws are hidden and are difficult to get to. Also, these screws remain in place due to the magnetic speakers inside.

  6. Monster SoundStage S1 Mini Disassembly: passo 6, immagine 1 di 3 Monster SoundStage S1 Mini Disassembly: passo 6, immagine 2 di 3 Monster SoundStage S1 Mini Disassembly: passo 6, immagine 3 di 3
    • Lift the speaker assembly and remove the stuffing.

    • When returning the speaker assembly, make sure the stuffing is tucked in.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Sarah Garcia

Membro da: 09/12/16

207 Reputazione

1 Guida realizzata

Team

CSU Fullerton, Team 2-6, Bruce Fall 2016 Membro di CSU Fullerton, Team 2-6, Bruce Fall 2016

CSUF-BRUCE-F16S2G6

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 58