Aggiusta la tua roba Comunità Store

Modal MD-SPBT01 Speaker Wiring Replacement

Introduzione

We will be opening up the speaker and replacing the wiring so the sound will work again.

Cosa ti serve

  1. Modal MD-SPBT01 Speaker Wiring Replacement, Speaker Wiring: passo 1, immagine 1 di 2 Modal MD-SPBT01 Speaker Wiring Replacement, Speaker Wiring: passo 1, immagine 2 di 2

    • Use the plastic opening tool to pull the metal cover off the top of the speaker.

    Modifica

  2. Modal MD-SPBT01 Speaker Wiring Replacement: passo 2, immagine 1 di 1

    • Remove the four screws that are inside the holes on the top of the speaker.

    • Use a Phillips 00 screwdriver to remove the 10mm screws.

    Modifica

  4. Modal MD-SPBT01 Speaker Wiring Replacement: passo 3, immagine 1 di 1

    • Pull the top piece of the speaker off to allow access to the interior.

    Modifica

  5. Modal MD-SPBT01 Speaker Wiring Replacement: passo 4, immagine 1 di 1

    • Locate the speaker wire connection and remove the wiring.

    • Locate the LED lighting wire and remove that as well.

    Modifica

  6. Modal MD-SPBT01 Speaker Wiring Replacement: passo 5, immagine 1 di 1

    • Once you disconnect the wires, you can remove the speaker.

    Modifica

  7. Modal MD-SPBT01 Speaker Wiring Replacement: passo 6, immagine 1 di 2 Modal MD-SPBT01 Speaker Wiring Replacement: passo 6, immagine 2 di 2

    • Remove the positive and negative connections for the wiring to fully disconnect the wire.

    • Now that you have removed the defective wiring, you can install a new one.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 494