Aggiusta la tua roba Comunità Store

Modal MD-SPBT01 Metal Speaker Covering Replacement

Introduzione

A damaged metal speaker covering may be bent or misshapen, causing it to continuously fall out of its place. This guide allows one to replace the covering to return the speaker to its original condition.

Cosa ti serve

  1. Modal MD-SPBT01 Metal Speaker Covering Replacement, Metal Speaker Covering: passo 1, immagine 1 di 2 Modal MD-SPBT01 Metal Speaker Covering Replacement, Metal Speaker Covering: passo 1, immagine 2 di 2

    • Remove the damaged metal speaker covering using the plastic opening tool.

    • The covering may be damaged that it is already out of its original place. If this is the condition, you may skip this step.

    Modifica

  3. Modal MD-SPBT01 Metal Speaker Covering Replacement: passo 2, immagine 1 di 1

    • Line up the replacement metal covering with the interior square ridge of the speaker.

    Modifica

  4. Modal MD-SPBT01 Metal Speaker Covering Replacement: passo 3, immagine 1 di 1

    • Firmly press the metal cover into the speaker until it is snug.

    • Super glue may be used to keep the cover in its place, although it is not necessary.

    Modifica
Linea Traguardo

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 9

Tutti i Tempi: 436