Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the single 18 mm Phillips #1 screw on the lamp access panel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the lamp access panel off of the back panel of the television by pulling straight back on the left side of the panel near the screw then pulling to the left.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Loosen the two Phillips #2 screws securing the lamp housing to the television until the screws will swivel vertically.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the handle, pull the lamp housing straight back out of the television.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the following 8 Phillips #1 screws:
-
One 22 mm Phillips #1 in the bottom right corner of the back panel.
-
One 18 mm Phillips #1 in the top middle of the back panel.
-
Six 18 mm Phillips #1 in the rest of the back panel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the back panel off of the television by gripping the sides and rotating it down.
-