Salta al contenuto principale

Introduzione

This short, simple guide will help you replace the rubber keyboard buttons on a Mitsubishi T200 cellphone.

  1. Begin disassembling the phone by removing the back of the phone and the battery.
    • Begin disassembling the phone by removing the back of the phone and the battery.

  2. Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver
    • Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver

  3. Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now

    Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now
  4. Pry the font plastic component from the “motherboard” component.
    • Pry the font plastic component from the “motherboard” component.

  5. Take out the old rubber keypad and replace with a new one.
    • Take out the old rubber keypad and replace with a new one.

  6. Reassemble by following previous steps in reverse order.
    • Reassemble by following previous steps in reverse order.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Katherine

Membro da: 13/02/2014

22 Reputazione

1 Guida realizzata

Team

Ohio State, Team 1-5, Meza Spring 2014 Membro di Ohio State, Team 1-5, Meza Spring 2014

OSU-MEZA-S14S1G5

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 508