Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

  1. Lift the black cover off. Remove all 4 Phillips #2 screws. Remove all 4 Phillips #2 screws.
    • Lift the black cover off.

    • Remove all 4 Phillips #2 screws.

  2. Remove the two 24mm Phillips #2 screws.
    • Remove the two 24mm Phillips #2 screws.

    • Remove the three 8mm Phillips #2 screws.

  3. Lift the back and pry the back off. The panel is held in with clips on the side. It needs a lot of force the take it off. The panel is held in with clips on the side. It needs a lot of force the take it off.
    • Lift the back and pry the back off.

    • The panel is held in with clips on the side. It needs a lot of force the take it off.

  4. Remove the four 5mm nut screws. Remove the four 5mm nut screws.
    • Remove the four 5mm nut screws.

  5. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  6. Remove the seven Phillips #1 screws. Remove the seven Phillips #1 screws.
    • Remove the seven Phillips #1 screws.

  7. Remove the three Phillips #2 screws. Remove the two data/power cables.
    • Remove the three Phillips #2 screws.

    • Remove the two data/power cables.

    • Remove the two speaker cables.

  8. Pull the two tabs. Pull the connector off. Pull the connector off.
    • Pull the two tabs.

    • Pull the connector off.

  9. Remove the switch cable off. Remove the two Phillips #2 screws.
    • Remove the switch cable off.

    • Remove the two Phillips #2 screws.

  10. Remove the four display power cables. These cables are interchangeable.
    • Remove the four display power cables.

    • These cables are interchangeable.

  11. Lift the display out. Lift the display out. Lift the display out.
    • Lift the display out.

  12. Remove the four Phillips #2 screws. These screws release the display from its enclosure. Hold the screen when removing these screws.
    • Remove the four Phillips #2 screws.

    • These screws release the display from its enclosure. Hold the screen when removing these screws.

  13. Remember to plug in all the cables on the display. Remember to plug in all the cables on the display.
    • Remember to plug in all the cables on the display.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Padraic Hoselton

Membro da: 22/08/2017

3.447 Reputazione

13 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

294 Membri

953 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 73