Salta al contenuto principale

Minolta Maxxum STsi Back Clock Button Replacement

Cosa ti serve

  1. Minolta Maxxum STsi Back Clock Button Replacement, Back Clock Button: passo 1, immagine 1 di 1
    • Open the back panel by firmly pressing up on the back-cover release on the lower right side of the camera.

  2. Minolta Maxxum STsi Back Clock Button Replacement: passo 2, immagine 1 di 3 Minolta Maxxum STsi Back Clock Button Replacement: passo 2, immagine 2 di 3 Minolta Maxxum STsi Back Clock Button Replacement: passo 2, immagine 3 di 3
    • Remove the black case by gently lifting it with your fingers and rotating counterclockwise.

  3. Minolta Maxxum STsi Back Clock Button Replacement: passo 3, immagine 1 di 2 Minolta Maxxum STsi Back Clock Button Replacement: passo 3, immagine 2 di 2
    • Remove the five black Phillips #00 2.5 mm screws from the back panel.

    • Also remove the two black Phillips #00 5.0 mm screws from the back panel.

  4. Minolta Maxxum STsi Back Clock Button Replacement: passo 4, immagine 1 di 1
    • Use the tweezers to carefully peel back the adhesive foam connecting the back panel to the case and remove the panel.

  5. Minolta Maxxum STsi Back Clock Button Replacement: passo 5, immagine 1 di 2 Minolta Maxxum STsi Back Clock Button Replacement: passo 5, immagine 2 di 2
    • Use the tweezers to carefully peel off the rubber clock button.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jacobe Labog

Membro da: 05/02/15

301 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 14-12, Amido Spring 2015 Membro di Cal Poly, Team 14-12, Amido Spring 2015

CPSU-AMIDO-S15S14G12

3 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 448