Aggiusta la tua roba Comunità Store

Minolta Maxxum QTSI Tripod Mount Replacement

Introduzione

If you are unable to mount your camera to a tripod, the tripod socket could be broken and may need to be replaced.

Cosa ti serve

  1. Minolta Maxxum QTSI Tripod Mount Replacement, Tripod Mount: passo 1, immagine 1 di 1

    • With a screwdriver, remove the (7) black Phillips #00 5.0mm screws on the bottom of the camera.

    • The screws are located on the outer edge of the bottom panel.

    • Be careful when removing the screws from the panel because they are easy to lose.

    Traduci

  2. Minolta Maxxum QTSI Tripod Mount Replacement: passo 2, immagine 1 di 2 Minolta Maxxum QTSI Tripod Mount Replacement: passo 2, immagine 2 di 2

    • Once all the screws are removed, the panel should easily come off.

    • Remove the bottom panel of the camera by placing your index finger and thumb on the outer edges of the panel.

    • Pull the bottom panel towards you, it should come off easily.

    Traduci

  4. Minolta Maxxum QTSI Tripod Mount Replacement: passo 3, immagine 1 di 1

    • The tripod socket is visible when the bottom panel is removed.

    • Remove the (3) black Phillips #00 6.25mm screws from the tripod socket.

    • When the screws are removed, the tripod socket is free and can easily be lost.

    Traduci

  5. Minolta Maxxum QTSI Tripod Mount Replacement: passo 4, immagine 1 di 2 Minolta Maxxum QTSI Tripod Mount Replacement: passo 4, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • Use the tweezers to gently remove the tripod socket, and replace it.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 8

Tutti i Tempi: 360