Unisciti alla Community delle riparazioni - Crea un account

Introduzione

The flashbulb and casing are one component located at the top of the camera. A replacement will be the whole component and not each of the parts separately.

Cosa ti serve

Passo 1 Casing

Minolta Dimage Xt Flashbulb and Housing Replacement, Casing: passo 1, immagine 1 di 3

Minolta Dimage Xt Flashbulb and Housing Replacement, Casing: passo 1, immagine 2 di 3

Minolta Dimage Xt Flashbulb and Housing Replacement, Casing: passo 1, immagine 3 di 3

Locate and remove the silver screws on each side of the camera.
Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws.

Modifica

Chiedi a FixBot

Passo 2

Minolta Dimage Xt Flashbulb and Housing Replacement: passo 2, immagine 3 di 3

Then, carefully pry apart the front and back outer casing away from the internal components.
Be aware of the ribbon wire that will disconnect when the casing is detached.

Modifica

Chiedi a FixBot

Passo 3 Flashbulb and Housing

Minolta Dimage Xt Flashbulb and Housing Replacement, Flashbulb and Housing: passo 3, immagine 1 di 2

Minolta Dimage Xt Flashbulb and Housing Replacement, Flashbulb and Housing: passo 3, immagine 2 di 2

Remove 2mm screws connecting the flash housing to the main components of the camera.
Use a Philips #00 screwdriver to remove the black 2.0mm (4 instances) screws .

Modifica

Chiedi a FixBot

Passo 4

Minolta Dimage Xt Flashbulb and Housing Replacement: passo 4, immagine 3 di 3

Use the spudger to push the black plastic hooks through the circuit board to release the flash housing.
Once the screws have been removed, pull the circuit board away from the body of the camera.
Wires will keep it from completely detaching.
Pull the housing away from the circuit board.