Aggiusta la tua roba Comunità Store

Milwaukee M12 2407-20 Speed Selector Lever Replacement

Introduzione

This guide will walk through the steps to replace the speed selector lever on the Milwaukee M12 2407-20.

Cosa ti serve

  1. Milwaukee M12 2407-20 Speed Selector Lever Replacement, Outer Casing: passo 1, immagine 1 di 1

    • Remove each of the seven 14mm Pan Hd. T-10 ST screws on one side of the housing assembly using the T10 screwdriver.

    Traduci

  2. Milwaukee M12 2407-20 Speed Selector Lever Replacement: passo 2, immagine 1 di 1

    • Remove metal clip located at the base of the drill, where the battery is to be inserted.

    • You may need to use a spudger if the clip is too difficult to remove with your fingers.

    Traduci

  4. Milwaukee M12 2407-20 Speed Selector Lever Replacement, Speed Selector Lever: passo 3, immagine 1 di 3 Milwaukee M12 2407-20 Speed Selector Lever Replacement, Speed Selector Lever: passo 3, immagine 2 di 3 Milwaukee M12 2407-20 Speed Selector Lever Replacement, Speed Selector Lever: passo 3, immagine 3 di 3

    • Remove the unit from the housing assembly and set the housing assembly aside.

    Traduci

  5. Milwaukee M12 2407-20 Speed Selector Lever Replacement: passo 4, immagine 1 di 1

    • Use a spudger to pry the broken speed selector lever off the assembly.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 27

Tutti i Tempi: 1,558