Aggiusta la tua roba Comunità Store

Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement

Introduzione

The following repair guide shows how to remove and replace the directional switch in a Milwaukee Hex Impact Driver 2750-20.

Cosa ti serve

  1. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Outer Casing: passo 1, immagine 1 di 1

    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

    Modifica

  3. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement: passo 2, immagine 1 di 1

    • Remove the drill casing to expose the drill's interior parts.

    Modifica

  4. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: passo 3, immagine 1 di 3 Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: passo 3, immagine 2 di 3 Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: passo 3, immagine 3 di 3

    • Remove the trigger assembly completely.

    • Remove the directional switch by lifting upward using a pair of tweezers, clearing the alignment pole on the trigger assembly.

    • Insert a new directional switch by aligning the hole on the switch with the pole on the trigger.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 18

Tutti i Tempi: 911