Milwaukee 5262-21 Power Cord Replacement

Introduzione

In this guide, we will be replacing a power cord that is not supplying power to your device. You will be replacing a power cord, that is typically common to become faulty on this device. You will be removing 4 bolts.

Cosa ti serve

Passo 1 Housing Assembly

Milwaukee 5262-21 Power Cord Replacement, Housing Assembly: passo 1, immagine 1 di 1

Remove the ten 19mm T20 Torx screws shown in red.

Modifica

Passo 2

Remove the red Housing Assembly by lifting it up off of the tool.

Modifica

Passo 3 Power Cord

Milwaukee 5262-21 Power Cord Replacement, Power Cord: passo 3, immagine 1 di 2

Milwaukee 5262-21 Power Cord Replacement, Power Cord: passo 3, immagine 2 di 2

Remove the two 11.5mm T-15 screws shown in red.

Modifica

Passo 4

Milwaukee 5262-21 Power Cord Replacement: passo 4, immagine 3 di 3

Follow the black and white cord to the trigger.
On the trigger there are two small bolts that you have to loosen.
Loosen them slightly with a H - 1.5 bit.

Modifica

Passo 5

Milwaukee 5262-21 Power Cord Replacement: passo 5, immagine 3 di 3

Once the bolts are loose you can pull both cords straight out from the trigger.
Pull the cable from the chassis and put it to the side and it has been successfully removed.

Modifica