Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four Tri-Wing screws securing the upper rear panel to the inner chassis.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slightly rotate the top edge of the upper rear panel away from the Zune.
-
Lift the upper rear panel straight up off the black plastic lower rear panel.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert a small Zune opening tool into the gap between the logic board and one side of the black plastic lower rear panel.
-
Carefully twist the Zune opening tool to pop the lower rear panel off the clips attaching it to the Zune.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully slide the lower rear panel away from the Zune.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.