Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Microsoft Zune 80 Case Replacement

Cosa ti serve

  1. Microsoft Zune 80 Case Replacement, Case: passo 1, immagine 1 di 1
    • Use a metal spudger or Zune opening tool to remove the small silver plastic cap on top of the device.

  2. Microsoft Zune 80 Case Replacement: passo 2, immagine 1 di 1
    • There are two T4 screws under the cap. Remove both with a T4 screwdriver.

    • Be careful removing the screws; the screw heads can break very easily.

  3. Microsoft Zune 80 Case Replacement: passo 3, immagine 1 di 3 Microsoft Zune 80 Case Replacement: passo 3, immagine 2 di 3 Microsoft Zune 80 Case Replacement: passo 3, immagine 3 di 3
    • Using a metal spudger or Zune opening tool, remove the aluminum backing starting from the top. There are 5 clips on each side and two on the bottom.

    • Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

turey

Membro da: 11/11/09

400 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 6-5, Maness Fall 2009 Membro di Cal Poly, Team 6-5, Maness Fall 2009

CPSU-MANESS-F09S6G5

5 Membri

5 Guide realizzate

Un commento

I have followed these steps but im unable to get the back case off, any tips for a stubborn backing?

zippy9765 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 11

Tutti i Tempi: 4,706