Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the watch on your wrist and determine whether links should be added or removed.
-
If watchband needs to be expanded, approximate the number of links required.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Set the watch on the block holder.
-
Ensure the arrows located on the links are pointing downward.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
When removing damaged or extra links, hold one end of the pin pusher against the pin to be removed.
-
Strike the other end of the pin pusher with the metal side of the watch hammer until the pin slides out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Discard the broken links or save any extra links that you remove.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
To add links to the watchband, position the watch on the block holder with the arrows facing upward.
-
Insert pins into the holes that connect the new link to the rest of the watchband.
-
Use the soft side of the hammer to strike the pin down.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lastly, make sure that all the pins joining the links are secured in place.
-
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.
9 Commenti
How do I replace a broken link when it's the very first link that connects the band to the actual watch?
How can I puchace the first link on my Michael kors ceramic watch
I need first link to attach to micheal kors ceramic white watch
The lady when I bought my watch at the mall told me that Michael Kors will give you two free links I'm trying to figure out how I can go about getting that
Where can I get the white bands that cover the links on my my watch as a few have bits broken