Salta al contenuto principale

Introduzione

Almost every watchmaker from Casio to Rolex produces watches with link bands. When adjusting or repairing a band becomes necessary, adding and removing links with a few special tools is the only solution. This comprehensive guide will demonstrate how to properly perform such manipulations on a Michael Kors brand wristwatch.

Ricambi

Nessuna parte specificata.

  1. Michael Kors Watch Link Band Replacement, Link Band: passo 1, immagine 1 di 1
    • Place the watch on your wrist and determine whether links should be added or removed.

    • If watchband needs to be expanded, approximate the number of links required.

  2. Michael Kors Watch Link Band Replacement: passo 2, immagine 1 di 3 Michael Kors Watch Link Band Replacement: passo 2, immagine 2 di 3 Michael Kors Watch Link Band Replacement: passo 2, immagine 3 di 3
    • Set the watch on the block holder.

    • Ensure the arrows located on the links are pointing downward.

  3. Michael Kors Watch Link Band Replacement: passo 3, immagine 1 di 1
    • When removing damaged or extra links, hold one end of the pin pusher against the pin to be removed.

    • Strike the other end of the pin pusher with the metal side of the watch hammer until the pin slides out.

    • Two pins hold each link to the band, so two pins must be removed per link.

  4. Michael Kors Watch Link Band Replacement: passo 4, immagine 1 di 1
    • Discard the broken links or save any extra links that you remove.

  5. Michael Kors Watch Link Band Replacement: passo 5, immagine 1 di 2 Michael Kors Watch Link Band Replacement: passo 5, immagine 2 di 2
    • To add links to the watchband, position the watch on the block holder with the arrows facing upward.

    • Insert pins into the holes that connect the new link to the rest of the watchband.

    • Use the soft side of the hammer to strike the pin down.

  6. Michael Kors Watch Link Band Replacement: passo 6, immagine 1 di 2 Michael Kors Watch Link Band Replacement: passo 6, immagine 2 di 2
    • Lastly, make sure that all the pins joining the links are secured in place.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

9 Commenti

How do I replace a broken link when it's the very first link that connects the band to the actual watch?

Karen Perri - Replica

How can I puchace the first link on my Michael kors ceramic watch

melissa.costello31 -

I need first link to attach to micheal kors ceramic white watch

melissa.costello31 -

The lady when I bought my watch at the mall told me that Michael Kors will give you two free links I'm trying to figure out how I can go about getting that

Claudia Mead - Replica

Where can I get the white bands that cover the links on my my watch as a few have bits broken

Karenclemo@gmail.com - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 15

Ultimi 7 Giorni: 133

Ultimi 30 Giorni: 590

Tutti i Tempi: 67,275