Introduzione
This is a simple guide on replacing a joystick on a Miadore Classic N64 Controller. If the joystick is out of place or used up, this guide will help you resolve your issue. This guide can also be used if you just want to change the joystick as a design choice.
Cosa ti serve
-
-
Unscrew all nine 3.2 mm Phillips #000 screws from the back of the controller.
-
Remove the back panel of the controller.
-
To reassemble your device, follow these instructions in reverse order. If all goes well, the joystick should work good as new.
To reassemble your device, follow these instructions in reverse order. If all goes well, the joystick should work good as new.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.