Passo 1 Case opening.




• With an opening pick we will leverage the edge between the interior part in which the earphones are placed and the exterior case. We will surround entire inner part with the opening pick until it comes out.
Traduci
Aggiungi un commento
Aggiungi un commento
Aggiungi Commento
1024
Annulla Pubblica commento
Passo 2 Board disassembly



• We will unscrew the 3 screws that join the board to the part where we place the earphones (with a Phillips 00 screwdriver).
Traduci
1 commento
Aggiungi un commento
Aggiungi Commento
1024
Annulla Pubblica commento
Passo 3 Assembly
• The Mi Airdots case will be disassembled.
• To assemble it, the screws are replaced as they are in step 2. We look to place the cables that connect the plate to the battery so that we do not crush them when we assemble the box.
Traduci
Aggiungi un commento
Aggiungi un commento
Aggiungi Commento
1024
Annulla Pubblica commento

Incorpora questa guida

Scegli una dimensione e copia il codice qui sotto per incorporare questa guida come un piccolo widget sul tuo sito/forum.

<iframe id="dozuki-embed-129508" src="https://it.ifixit.com/Guida/embed/129508/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-129508"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://it.ifixit.com/Guida/embed/129508" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Anteprima