Aggiusta la tua roba Comunità Store

Maze Speed SSB-508 Power and Volume Button Replacement

Introduzione

This guide will show you how to replace the power and volume buttons in a Maze Speed SSB-508 phone. If the power or volume buttons are unresponsive or malfunctioning, they may need to be replaced. To complete this guide, a plastic opening tool, tweezers, and a new button piece is required. Precision is recommended, as to not damage any components.

Cosa ti serve

  1. Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: passo 1, immagine 1 di 3 Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: passo 1, immagine 2 di 3 Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: passo 1, immagine 3 di 3

    • Remove the back cover by gently prying open the bottom left corner of the case with the plastic opening tool.

    Traduci

  3. Maze Speed SSB-508 Power and Volume Button Replacement: passo 2, immagine 1 di 2 Maze Speed SSB-508 Power and Volume Button Replacement: passo 2, immagine 2 di 2

    • There are three areas holding the power and volume buttons in place. Gently pull the bottom of the power button with a pair of fine-tip tweezers to release the lower half.

    Traduci

  4. Maze Speed SSB-508 Power and Volume Button Replacement: passo 3, immagine 1 di 3 Maze Speed SSB-508 Power and Volume Button Replacement: passo 3, immagine 2 di 3 Maze Speed SSB-508 Power and Volume Button Replacement: passo 3, immagine 3 di 3

    • Carefully remove the top section of the button with the fine-tip tweezers . This should free the button completely.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 284