Introduzione

This guide will show you how to remove the dashboard for a Mazda 323 Protege.

Parti

Nessuna parte richiesta.

  1. Upgrading your Dashboard or what ever, you might want to open your Dashboard, this is the Easy Way...
    • Upgrading your Dashboard or what ever, you might want to open your Dashboard, this is the Easy Way...

  2. Open your door, you will see a Plastic Cover, remove it with a screwdriver or by hand. Open your door, you will see a Plastic Cover, remove it with a screwdriver or by hand. Open your door, you will see a Plastic Cover, remove it with a screwdriver or by hand.
    • Open your door, you will see a Plastic Cover, remove it with a screwdriver or by hand.

  3. Remove the 3 screws holding the cover in place. Remove the 3 screws holding the cover in place. Remove the 3 screws holding the cover in place.
    • Remove the 3 screws holding the cover in place.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Remove the 2 screws above of the Dashboard.
    • Remove the 2 screws above of the Dashboard.

  6. Now to the magic: usualy, one must remove the steering wheel in order to continue. There are 2 easy alternatives:
    • Now to the magic: usualy, one must remove the steering wheel in order to continue. There are 2 easy alternatives:

  7. Option 1: With height adjustable steering wheel: remove the screw holding the top steering column trim and lower the column to its lowest by releasing the lever. Remove the top steering column trim.
    • Option 1: With height adjustable steering wheel: remove the screw holding the top steering column trim and lower the column to its lowest by releasing the lever. Remove the top steering column trim.

  8. Option 2: Without height adjustable steering column: Remove all 4 screws of the steering column trim. Afterwards: remove the large golden screws. Be carefull whilst removing the last one: hold the column tight with one hand or it will fall, since it is screwed to nothing else. Option 2: Without height adjustable steering column: Remove all 4 screws of the steering column trim. Afterwards: remove the large golden screws. Be carefull whilst removing the last one: hold the column tight with one hand or it will fall, since it is screwed to nothing else.
    • Option 2: Without height adjustable steering column: Remove all 4 screws of the steering column trim. Afterwards: remove the large golden screws. Be carefull whilst removing the last one: hold the column tight with one hand or it will fall, since it is screwed to nothing else.

  9. After Option 1 or 2: Pull the trim out of its holding clips. Disconnect all wires, except for clock and hazard switch. Slowly remove the trim, in case of Option 1: you might have to slightly bend the trim, be carefull. Afterwards: Rotate the trim 180° around the clock wire.
    • After Option 1 or 2: Pull the trim out of its holding clips. Disconnect all wires, except for clock and hazard switch. Slowly remove the trim, in case of Option 1: you might have to slightly bend the trim, be carefull. Afterwards: Rotate the trim 180° around the clock wire.

  10. Finally: Remove the 4 screws holding the dashboard. Disconnect the 3 connectors and speed wire and you are done!
    • Finally: Remove the 4 screws holding the dashboard. Disconnect the 3 connectors and speed wire and you are done!

Conclusione

To reassemble your device, follow these instructions in reverse order.

Frank

Membro da: 21/12/2017

169 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 70

Tutti i Tempi: 834