Salta al contenuto principale

Matchbox Dino Trapper Trailer Eyes Replacement

Cosa ti serve

  1. Matchbox Dino Trapper Trailer Eyes Replacement, Eyes: passo 1, immagine 1 di 1
    • Open the jaw of the T-Rex to reveal the screw on the roof of its mouth.

  2. Matchbox Dino Trapper Trailer Eyes Replacement: passo 2, immagine 1 di 1
    • Using a JIS #1 screwdriver, remove the 9.6mm screw.

  3. Matchbox Dino Trapper Trailer Eyes Replacement: passo 3, immagine 1 di 1
    • Using tweezers or wire cutters for tension, remove the cover to reveal the LED assembly.

  4. Matchbox Dino Trapper Trailer Eyes Replacement: passo 4, immagine 1 di 1
    • Remove the plastic cover from the top of the LED.

  5. Matchbox Dino Trapper Trailer Eyes Replacement: passo 5, immagine 1 di 1
    • Hold the LED to remove slack from the wires, and cut the wires as shown to remove the faulty LED.

Conclusione

To reassemble your device, follow these instructions in reverse order. Use a soldering station to solder new LED onto the fresh-cut wires.

Team

IUPUI, Team S3-G3, Harley Spring 2018 Membro di IUPUI, Team S3-G3, Harley Spring 2018

IUPUI-HARLEY-S18S3G3

3 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 232