Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the cushion off of the desired side by gripping the top of the headphones and pulling the cushion off.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 5mm screws from the earpiece with a Y1 Triwing screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the Jimmy to lift up the black cover to get inside the device.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 2mm screw holding the side cover plate in place with a JIS #00 screwdriver.
-
Move the side cover off to the side.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Desolder all the wires connected to the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 2mm screws holding the motherboard in place.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.