Aggiusta la tua roba Comunità Store

Marvel iHome MR-M66 Back Cover Replacement

Introduzione

This guide will show how to remove and replace this device's back cover. No additional experience is required.

Cosa ti serve

  1. Marvel iHome MR-M66 Back Cover Replacement, Back Cover: passo 1, immagine 1 di 2 Marvel iHome MR-M66 Back Cover Replacement, Back Cover: passo 1, immagine 2 di 2

    • Remove two of the three screws shown on the bottom of the device.

    • Begin removing the last screw, but leave it partially in the socket to remove the bottom cover easier.

    Modifica

  2. Marvel iHome MR-M66 Back Cover Replacement: passo 2, immagine 1 di 3 Marvel iHome MR-M66 Back Cover Replacement: passo 2, immagine 2 di 3 Marvel iHome MR-M66 Back Cover Replacement: passo 2, immagine 3 di 3

    • Remove the bottom cover by either pulling on the screw or using a plastic opening tool to pry the cover off.

    • After removing the bottom cover, remove the two screws.

    Modifica

  3. Marvel iHome MR-M66 Back Cover Replacement: passo 3, immagine 1 di 3 Marvel iHome MR-M66 Back Cover Replacement: passo 3, immagine 2 di 3 Marvel iHome MR-M66 Back Cover Replacement: passo 3, immagine 3 di 3

    • Use a spudger to release the small retaining clip that holds the feet to the bottom of the device.

    • Be careful here, as too much force can break the clip.

    • Remove the two screws from the back of the device.

    Modifica

  4. Marvel iHome MR-M66 Back Cover Replacement: passo 4, immagine 1 di 3 Marvel iHome MR-M66 Back Cover Replacement: passo 4, immagine 2 di 3 Marvel iHome MR-M66 Back Cover Replacement: passo 4, immagine 3 di 3

    • Using a plastic opening tool and your hand, separate the front and back covers from each other.

    • Starting from the bottom, use the plastic opening tool to create the initial separation and continue along the seam to the top of the device.

    • This step requires the most time and patience, so be careful.

    • The power switch will most likely come loose during this step and you will hear something rattling inside the device.

    Modifica

  5. Marvel iHome MR-M66 Back Cover Replacement: passo 5, immagine 1 di 3 Marvel iHome MR-M66 Back Cover Replacement: passo 5, immagine 2 di 3 Marvel iHome MR-M66 Back Cover Replacement: passo 5, immagine 3 di 3

    • Remove the two arms from either side of the device once a significant separation has been created.

    • They are not fixed to the body itself so you should be able to wiggle them free.

    • Continue pulling the back cover off the device.

    • Remove the red cover for the on/off switch from the device.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 105