Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
To start the disassembly of the Magic Bullet NutriBullet Pro you will begin from the bottom.
-
Flip the device over to the bottom.
-
Unscrew the four 1 cm screws using #2 Phillips Head Screwdriver.
-
Remove the loose bottom portion of the device by pulling up from the bottom.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the two 1 cm screws holding down the power cord using the #2 Phillips Head Screwdriver.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the three 1 cm screws on the device circled on the screws pictures using the #1 Philips Head Screwdriver.
-
Lift off the grey plastic piece off.
-
Slide off the silver metal piece.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the device over.
-
Remove the three rubber seals covering the screws by pulling the components upward with the tweezer.
-
Unscrew the three 16 mm screws using the #2 Phillips Head Screwdriver.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.