Salta al contenuto principale

Magic Bullet NutriBullet Pro Disassembly

Solo Prerequisita
Questa guida รจ destinata a essere usata solo come prerequisito per altre guide. Da sola รจ incompleta.

Cosa ti serve

  1. Magic Bullet NutriBullet Pro Disassembly, Magic Bullet NutriBullet Pro Disassembly: passo 1, immagine 1 di 3 Magic Bullet NutriBullet Pro Disassembly, Magic Bullet NutriBullet Pro Disassembly: passo 1, immagine 2 di 3 Magic Bullet NutriBullet Pro Disassembly, Magic Bullet NutriBullet Pro Disassembly: passo 1, immagine 3 di 3
    • To start the disassembly of the Magic Bullet NutriBullet Pro you will begin from the bottom.

    • Flip the device over to the bottom.

    • Unscrew the four 1 cm screws using #2 Phillips Head Screwdriver.

    • Remove the loose bottom portion of the device by pulling up from the bottom.

  2. Magic Bullet NutriBullet Pro Disassembly: passo 2, immagine 1 di 2 Magic Bullet NutriBullet Pro Disassembly: passo 2, immagine 2 di 2
    • Unscrew the two 1 cm screws holding down the power cord using the #2 Phillips Head Screwdriver.

  3. Magic Bullet NutriBullet Pro Disassembly: passo 3, immagine 1 di 3 Magic Bullet NutriBullet Pro Disassembly: passo 3, immagine 2 di 3 Magic Bullet NutriBullet Pro Disassembly: passo 3, immagine 3 di 3
    • Unscrew the three 1 cm screws on the device circled on the screws pictures using the #1 Philips Head Screwdriver.

    • Lift off the grey plastic piece off.

    • Slide off the silver metal piece.

  4. Magic Bullet NutriBullet Pro Disassembly: passo 4, immagine 1 di 2 Magic Bullet NutriBullet Pro Disassembly: passo 4, immagine 2 di 2
    • Flip the device over.

    • Remove the three rubber seals covering the screws by pulling the components upward with the tweezer.

    • Unscrew the three 16 mm screws using the #2 Phillips Head Screwdriver.

  5. Magic Bullet NutriBullet Pro Disassembly: passo 5, immagine 1 di 2 Magic Bullet NutriBullet Pro Disassembly: passo 5, immagine 2 di 2
    • Pull off the casing from the device.

Linea Traguardo

Altre 2 persone hanno completato questa guida.

Brett Crews

Membro da: 10/02/16

170 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 18-4, Forte Fall 2016 Membro di Cal Poly, Team 18-4, Forte Fall 2016

CPSU-FORTE-F16S18G4

4 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 697