Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unplug the device from the wall and turn the powerbase upside down.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a #2 Phillips Head Screwdriver to unscrew the four 10 mm screws located on the bottom of the power base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use slight tension to remove the plastic base from the NutriBullet once all of the screws are removed.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the power cord to remove it from the side slot on the curved base.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a #2 Phillips Head Screwdriver to remove the two 10 mm screws that secure the white bracket down.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a #2 Phillips Head Screwdriver to remove the three 10mm screws that keep the base in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use slight tension to remove the curved base by lifting it upward off of the outside casing.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.