Salta al contenuto principale

Ricambi

Nessuna parte specificata.

  1. Unplug the device from the wall and turn the powerbase upside down.
    • Unplug the device from the wall and turn the powerbase upside down.

  2. Use a #2 Phillips Head Screwdriver to unscrew the four 10 mm screws located on the bottom of the power base. Use a #2 Phillips Head Screwdriver to unscrew the four 10 mm screws located on the bottom of the power base.
    • Use a #2 Phillips Head Screwdriver to unscrew the four 10 mm screws located on the bottom of the power base.

  3. Use slight tension to remove the plastic base from the NutriBullet once all of the screws are removed.
    • Use slight tension to remove the plastic base from the NutriBullet once all of the screws are removed.

    • Once the plastic base is removed, there is a fan located in the center of the powerbase. Make sure the cord does not get caught or frayed by the fan.

  4. Lift the power cord to remove it from the side slot on the curved base.
    • Lift the power cord to remove it from the side slot on the curved base.

  5. Use a #2 Phillips Head Screwdriver to remove the two 10 mm screws that secure the white bracket down. The white safety bracket holds the cord down.  After removing it, the cord will be loosened.
    • Use a #2 Phillips Head Screwdriver to remove the two 10 mm screws that secure the white bracket down.

    • The white safety bracket holds the cord down. After removing it, the cord will be loosened.

  6. Use a #2 Phillips Head Screwdriver to remove the three 10mm screws that keep the base in place.
    • Use a #2 Phillips Head Screwdriver to remove the three 10mm screws that keep the base in place.

  7. Use slight tension to remove the curved base by lifting it upward off of the outside casing.
    • Use slight tension to remove the curved base by lifting it upward off of the outside casing.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Geary Yu

Membro da: 22/01/2015

1.172 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 19-8, Maness Winter 2015 Membro di Cal Poly, Team 19-8, Maness Winter 2015

CPSU-MANESS-W15S19G8

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 38

Tutti i Tempi: 3,055