Salta al contenuto principale

Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement

Cosa ti serve

  1. Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement, Rear and Side Case: passo 1, immagine 1 di 1
    • Use tweezers to completely remove the sticker from the rear of controller.

  2. Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement: passo 2, immagine 1 di 1
    • Find the seven 8.3 mm Phillips screws on the rear of the controller and remove them.

  3. Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement: passo 3, immagine 1 di 2 Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement: passo 3, immagine 2 di 2
    • Use a plastic opening tool to separate the rear and front casing by inserting it in-between the two cases.

    • Use the plastic opening tool to pry the two cases apart.

  4. Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement: passo 4, immagine 1 di 2 Mad Catz Street Fighter IV FightPad Rear and Side Case Replacement: passo 4, immagine 2 di 2
    • Remove the two rubber side grips.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Jefferson Hsu

Membro da: 09/18/12

411 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 1-7, Propen Fall 2012 Membro di Cal Poly, Team 1-7, Propen Fall 2012

CPSU-PROPEN-F12S1G7

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 929