Salta al contenuto principale

Mad Catz Dual Force 2 Pro Motherboard Replacement

Cosa ti serve

  1. Mad Catz Dual Force 2 Pro Motherboard Replacement, Motherboard: passo 1, immagine 1 di 1
    • Remove the six 7 mm Phillips screws from the rear cover.

  2. Mad Catz Dual Force 2 Pro Motherboard Replacement: passo 2, immagine 1 di 1
    • Remove the back of the controller.

    • There are no loose items in the controller that can fall out, so you can open it, generally, however you want.

  3. Mad Catz Dual Force 2 Pro Motherboard Replacement: passo 3, immagine 1 di 1
    • Remove the two 7 mm screws on the closest circuit board.

  4. Mad Catz Dual Force 2 Pro Motherboard Replacement: passo 4, immagine 1 di 2 Mad Catz Dual Force 2 Pro Motherboard Replacement: passo 4, immagine 2 di 2
    • Lift the closest circuit board away from the motherboard.

    • Be sure you do not tear the ribbon connecting the smaller circuit board to the motherboard.

  5. Mad Catz Dual Force 2 Pro Motherboard Replacement: passo 5, immagine 1 di 1
    • Remove the two 7 mm Philip screws on the motherboard.

  6. Mad Catz Dual Force 2 Pro Motherboard Replacement: passo 6, immagine 1 di 1
    • Remove the motherboard assembly from the cover.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

USF Tampa, Team 7-2, Remmell Winter 2015 Membro di USF Tampa, Team 7-2, Remmell Winter 2015

USFT-REMMELL-W15S7G2

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 11

Tutti i Tempi: 582