Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Parti

Nessuna parte specificata.

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Orient the computer so the battery is facing you.
    • Orient the computer so the battery is facing you.

    • Slide the gray plastic battery cover to the right.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Pull the battery toward yourself until it is fully detached.
    • Pull the battery toward yourself until it is fully detached.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Orient the computer right side up with the rear facing you.
    • Orient the computer right side up with the rear facing you.

    • Open the Input/Output (I/O) door.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Carefully bend the door into an arch until one of the pins releases from its slot.
    • Carefully bend the door into an arch until one of the pins releases from its slot.

    • Once one of the pins is free, remove the I/O door from the computer.

  5. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  6. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Orient the computer with the bottom facing up and rear facing you. You should be able to read the Macintosh label in this position.
    • Orient the computer with the bottom facing up and rear facing you. You should be able to read the Macintosh label in this position.

  7. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use a T8 torx screwdriver to remove the 6.8mm long screw above and to the right of the modem jack.
    • Use a T8 torx screwdriver to remove the 6.8mm long screw above and to the right of the modem jack.

    • Twist counter clockwise to remove the screw.

  8. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Use a T10 torx screwdriver to remove the four, 18mm long screws from the lower case.
    • Use a T10 torx screwdriver to remove the four, 18mm long screws from the lower case.

  9. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Place your hands on the lower case, just above the I/O panel, and slowly lift the lower case a few inches above the main body of the computer. Release the large, gray interconnect ribbon cable just behind the I/O panel.
    • Place your hands on the lower case, just above the I/O panel, and slowly lift the lower case a few inches above the main body of the computer.

    • Release the large, gray interconnect ribbon cable just behind the I/O panel.

    • Caution: Lower case cannot be fully removed until two plastic clips in the front corners are released. See the following step for details.

  10. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Place your thumb on the upper case, inside the empty battery slot, and your index finger near your thumb on the left side of the lower case. Pinch your thumb and index finger towards each other to release the clip. Without releasing pressure on the pinch grip, use your index finger to push the lower case upwards.
    • Place your thumb on the upper case, inside the empty battery slot, and your index finger near your thumb on the left side of the lower case.

    • Pinch your thumb and index finger towards each other to release the clip. Without releasing pressure on the pinch grip, use your index finger to push the lower case upwards.

    • Lift the lower case to remove it.

  11. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Locate and lift ram card directly up until connector releases. Move the card back and forth gently if the connector does not release immediately.
    • Locate and lift ram card directly up until connector releases.

    • Move the card back and forth gently if the connector does not release immediately.

  12. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    Locate and lift the PSRAM expansion card vertically until connector releases. If the PSRAM expansion card is difficult to remove, gently jostle it back and forth as you lift up.
    • Locate and lift the PSRAM expansion card vertically until connector releases.

    • If the PSRAM expansion card is difficult to remove, gently jostle it back and forth as you lift up.

    • The PSRAM expansion card is an optional component, and may not be included in all devices.

Linea Traguardo

Adam

Membro da: 12/10/2011

1 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 6-3, Regan Fall 2011 Membro di Cal Poly, Team 6-3, Regan Fall 2011

CPSU-REGAN-F11S6G3

4 Membri

12 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 986