Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Macintosh PowerBook 165c Display Replacement

Introduzione

Use this guide to replace the display.

Cosa ti serve

  1. Macintosh PowerBook 165c Display Replacement, Display: passo 1, immagine 1 di 1

    • Orientate the computer right side up and open the display case to reveal the display.

    • Use a plastic opening tool to remove the two small plastic plugs located on the display case just below the display.

    Traduci

  2. Macintosh PowerBook 165c Display Replacement: passo 2, immagine 1 di 1

    • Use a T8 torx screwdriver to remove the two, 7.7mm long screws that were revealed by removing the plastic plugs.

    • Twist counterclockwise to remove the screw.

    • Caution: Once the screws are removed, the display is only held by two screws. Handle delicately.

    Traduci

  3. Macintosh PowerBook 165c Display Replacement: passo 3, immagine 1 di 1

    • Grip the two bottom corners of the plastic display cover and gently pull towards yourself so that the display cover rotates about the top of the display case.

    • The display cover should release from top.

    • Remove the display case.

    Traduci

  5. Macintosh PowerBook 165c Display Replacement: passo 4, immagine 1 di 1

    • Locate the black connector on the right of the display. The connector can be identified by the pink, light blue, and white wires protruding from its side.

    • Remove the black connector from the circuit board by pulling it away from its adapter.

    Traduci

  6. Macintosh PowerBook 165c Display Replacement: passo 5, immagine 1 di 1

    • Using a T8 torx screwdriver, remove the four, 10.8mm long screws from the corners of the display.

    • Caution: The display is no longer supported and must be handled with care.

    Traduci

  7. Macintosh PowerBook 165c Display Replacement: passo 6, immagine 1 di 1

    • Carefully tilt the display downwards and rest it on the keyboard.

    Traduci

  8. Macintosh PowerBook 165c Display Replacement: passo 7, immagine 1 di 3 Macintosh PowerBook 165c Display Replacement: passo 7, immagine 2 di 3 Macintosh PowerBook 165c Display Replacement: passo 7, immagine 3 di 3

    • Locate the orange ribbon cable on the back of the display.

    • Open the white tab fastener by pulling it outward.

    • Remove the orange ribbon cable by gently pulling it away from the opened tab fastener.

    • The display is now free.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Jason

Membro da: 10/12/11

89 Reputazione

4 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

Cal Poly, Team 6-3, Regan Fall 2011 Membro di Cal Poly, Team 6-3, Regan Fall 2011

CPSU-REGAN-F11S6G3

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 13

Tutti i Tempi: 2,199