Aggiusta la tua roba Comunità Store

Macintosh PowerBook 1400 Series Keyboard Replacement

Introduzione

The keyboard has 3 main parts, including the speaker cover, the heat sink, and the keyboard itself. You have to remove these in order to remove the keyboard.

Cosa ti serve

  1. Macintosh PowerBook 1400 Series Keyboard Replacement, Battery: passo 1, immagine 1 di 1

    • Turn the device upside down and then locate the battery latch near the front of the device.

    Modifica

  2. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 2, immagine 1 di 1

    • Slide the latch to the left to release the battery.

    Modifica

  3. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 3, immagine 1 di 1

    • Continue holding the latch then gently pull the battery out of the device.

    • Place the battery in a safe location.

    Modifica

  4. Macintosh PowerBook 1400 Series Keyboard Replacement, CD-ROM Drive: passo 4, immagine 1 di 1

    • Locate the CD-ROM Drive latch.

    Modifica

  5. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 5, immagine 1 di 1

    • Slide the latch to the right to release the CD ROM drive.

    Modifica

  6. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 6, immagine 1 di 1

    • Continue holding the latch then gently pull the CD-ROM Drive out of the device.

    • Place the CD ROM drive in a safe location.

    Modifica

  7. Macintosh PowerBook 1400 Series Keyboard Replacement, Keyboard: passo 7, immagine 1 di 1

    • Locate the speaker cover.

    Modifica

  9. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 8, immagine 1 di 1

    • Press firmly on each end of the speaker cover and slide it to the left.

    Modifica

  10. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 9, immagine 1 di 1

    • Gently lift the speaker cover to remove it.

    Modifica

  11. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 10, immagine 1 di 1

    • Lift the keyboard up from the back using a spudger(wedge side).

    Modifica

  12. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 11, immagine 1 di 1

    • Gently lift the keyboard until only the ribbon cable remains attached.

    Modifica

  13. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 12, immagine 1 di 1

    • Tilt the keyboard away from the screen.

    Modifica

  14. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 13, immagine 1 di 1

    • Locate the six screws that secure the heatsink.

    Modifica

  15. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 14, immagine 1 di 1

    • Remove the six screws from the heatsink using the Philips #1 screwdriver.

    Modifica

  16. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 15, immagine 1 di 1

    • Lift the heatsink from the side closest to the laptop screen.

    Modifica

  17. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 16, immagine 1 di 1

    • Remove the heatsink.

    Modifica

  18. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 17, immagine 1 di 1

    • Gently pull up on the beige ribbon lock until it moves a short distance on both sides to separate the ribbon cable from the connector.

    Modifica

  19. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 18, immagine 1 di 1

    • Detach the ribbon cable.

    Modifica

  20. Macintosh PowerBook 1400 Series Keyboard Replacement: passo 19, immagine 1 di 1

    • Remove the keyboard.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 12 altri collaboratori

Sean Bent

Membro da: 04/01/11

41 Reputazione

1 Guida realizzata

Distintivi: 4

+ 1 altro distintivo

Team

Cal Poly, Team 10-39, Forte Spring 2011 Membro di Cal Poly, Team 10-39, Forte Spring 2011

CPSU-FORTE-S11S10G39

5 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 9

Tutti i Tempi: 2,419