Introduzione

Remove the lower case to access most of your MacBook Pro's internals.

  1. Remove the following ten screws securing the lower case to the upper case:
    • Remove the following ten screws securing the lower case to the upper case:

    • Three 13.5 mm (14.1 mm) Phillips screws.

    • Seven 3 mm Phillips screws.

    • When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 16 persone hanno completato questa guida.

Andrew Optimus Goldberg

Membro da: 17/10/2009

406.150 Reputazione

412 Guide realizzate

Team

iFixit Membro di iFixit

Community

100 Membri

7.963 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 25

Ultimi 30 Giorni: 140

Tutti i Tempi: 13,289