Salta al contenuto principale

MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement, Hard Drive: passo 1, immagine 1 di 1
    • Remove two Phillips screws securing the hard drive bracket to the upper case.

    • These screws are captive to the hard drive bracket.

  2. MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement: passo 2, immagine 1 di 1
    • Lift the the retaining bracket out of the upper case.

  3. MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement: passo 3, immagine 1 di 1
    • Lift the hard drive by its pull tab and pull it out of the chassis, minding the cable attaching it to the computer.

  4. MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement: passo 4, immagine 1 di 2 MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement: passo 4, immagine 2 di 2
    • Remove the hard drive cable by pulling its connector straight away from the hard drive.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,124