Salta al contenuto principale

MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement, Optical Drive: passo 1, immagine 1 di 1
    • Disconnect the camera cable by pulling the male end straight away from its socket.

  2. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: passo 2, immagine 1 di 1
    • Deroute the camera data cable from the channel in the optical drive.

  3. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: passo 3, immagine 1 di 1
    • Use a spudger to pry the optical drive connector straight up off the logic board.

  4. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: passo 4, immagine 1 di 2 MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: passo 4, immagine 2 di 2
    • Remove two 8 mm Phillips screws securing the camera cable bracket to the upper case.

    • The rightmost screw may remain captive in the camera cable.

    • Lift the camera cable bracket out from the upper case.

  5. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: passo 5, immagine 1 di 1
    • Remove the following three Phillips screws securing the optical drive to the upper case:

    • One 3.5 mm Phillips screw.

    • Two 2.5 mm Phillips screws.

  6. MacBook Pro 15" Unibody Late 2008 and Early 2009 Optical Drive Replacement: passo 6, immagine 1 di 1
    • Lift the optical drive from its left edge and pull it out of the computer.

Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,240