Salta al contenuto principale

Fix Your Stuff

Right to Repair

Parts & Tools

Parti

Nessuna parte specificata.

  1. Remove the two 7.5 mm ( 7.2 mm )Tri-point screws securing the battery to the upper case.
    • Remove the two 7.5 mm ( 7.2 mm )Tri-point screws securing the battery to the upper case.

  2. Carefully peel the battery warning label off the upper case between the battery and the optical drive to reveal an additional Tri-point screw.
    • Carefully peel the battery warning label off the upper case between the battery and the optical drive to reveal an additional Tri-point screw.

    • Remove the last 7.5 mm ( 7.2 mm ) Tri-point screw securing the battery to the upper case.

    • Do not remove the label from the battery.

  3. Use the attached plastic pull tab to remove the battery from the upper case.
    • Use the attached plastic pull tab to remove the battery from the upper case.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

iFixit Membro di iFixit

Community

108 Membri

9.891 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 210