Aggiusta la tua roba Comunità Store

MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement

Introduzione

Accessing the RAM in this computer is straightforward and requires minimal disassembly.

Cosa ti serve

  1. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement, Lower Case: passo 1, immagine 1 di 1

    • Remove the following ten screws securing the lower case to the upper case:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

    Traduci

  3. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement: passo 2, immagine 1 di 1

    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

    Traduci

  4. MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement, RAM: passo 3, immagine 1 di 2 MacBook Pro 15" Unibody 2.53 GHz Mid 2009 RAM Replacement, RAM: passo 3, immagine 2 di 2

    • Release the tabs on each side of the chip by simultaneously pushing each tab away from the RAM.

    • These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

    • After the RAM chip has popped up, pull it straight out of its socket.

    • Repeat this process if a second RAM chip is installed.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 96 persone hanno completato questa guida.

Un commento

How is this easier than removing a drive? Its both relatively easy. Otherwise good guides.

Jr. - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 26

Tutti i Tempi: 40,939