Aggiusta la tua roba Comunità Store

MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement

Introduzione

Input, Output, Sideput. Whatever kind of puting you will be doing, a faulty I/O board cable is going to severely limit the functionality of your MacBook Pro. This guide will show you how to replace it.

Cosa ti serve

  1. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement, Lower Case: passo 1, immagine 1 di 1

    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.1 mm

    • Two 2.3 mm

    Traduci

  2. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 2, immagine 1 di 2 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 2, immagine 2 di 2

    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    Traduci

  3. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 3, immagine 1 di 3 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 3, immagine 2 di 3 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 3, immagine 3 di 3

    • The lower case has two plastic pegs (red) that fit into plastic clips in the upper case (orange).

    • During reassembly, gently push down the center of the lower case to reattach the case to its two plastic clips.

    Traduci

  5. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement, Battery Connector: passo 4, immagine 1 di 1

    • Peel back the sticker covering the battery connector.

    Traduci

  6. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 5, immagine 1 di 3 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 5, immagine 2 di 3 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 5, immagine 3 di 3

    • Gently lift each side of the battery connector to pry the connector out of its socket on the logic board.

    • Bend the connector back toward the battery, ensuring that the battery connector doesn't accidentally make contact with the logic board.

    Traduci

  7. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement, I/O Board Cable (Top): passo 6, immagine 1 di 1

    • Remove the four 2.2 mm T5 Torx screws securing the I/O board cable connector covers.

    Traduci

  8. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 7, immagine 1 di 2 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 7, immagine 2 di 2

    • Remove the left connector cover.

    • Use the flat end of a spudger to pry the left end of the I/O board cable up from its socket on the logic board.

    Traduci

  9. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 8, immagine 1 di 2 MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 8, immagine 2 di 2

    • Remove the right connector cover.

    • Use the flat end of a spudger to pry the right end of the I/O board cable up from its socket on the logic board.

    Traduci

  10. MacBook Pro 15" Retina Display Mid 2015 I/O Board Cable (Top) Replacement: passo 9, immagine 1 di 1

    • Peel the top I/O board cable up from the adhesive securing it to the fan.

    • Remove the cable.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Andrew Optimus Goldheart

Membro da: 10/17/09

502.858 Reputazione

407 Guide realizzate

Distintivi: 44

+41 altri distintivi

Team

iFixit Membro di iFixit

Staff

135 Membri

16.817 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 23

Ultimi 30 Giorni: 103

Tutti i Tempi: 8,960