Cosa ti serve
-
-
Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board. On reassembly, connect this end first as it does not flex.
-
In a similar fashion, remove the I/O Board connector from its socket on the I/O Board.
-
Remove the I/O Board cable from the MacBook Pro.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.